| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-426-7040 Item Description: Hose Assembly Nonme | 4720 | 014267040 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12412743-01 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKV | OUTSIDE DIAMETER | 0.840 INCHES NOMINAL |
| CQGH | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END 0.562 INCHES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OZONE RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT |
| CRZY | (NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 2B 1ST END 2B 2ND END |
| CQBB | (NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| AGAV | END ITEM IDENTIFICATION | 2320-01-354-4528; AN/AVR-2, LASER DETECITNG SET |
| ADLG | (NON-CORE DATA) FIRST END FITTING SPEC/STD DATA | SAE J516, TABLE 4B-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE 2ND LAYER BRAIDED STEEL WIRE OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| ADJM | (NON-CORE DATA) INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| ADLH | (NON-CORE DATA) SECOND END FITTING SPEC/STD DATA | SAE J516, TABLE 4B-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBG | (NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END UNJF 2ND END |
| CRBL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END ELBOW 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 31.280 INCHES NOMINAL OVERALL |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| AAJD | THREAD CLASS | 2B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| ABJH | TEMP RATING | -50.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABJH | TEMP RATING | -50.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AAJD | THREAD CLASS | 2B 1ST END |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
