| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-342-0717 Item Description: Resistor Variable N | 5905 | 013420717 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Cm45839 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| ABJT | TERMINAL LENGTH | 0.250 INCHES MINIMUM |
| ABXF | SHAFT LENGTH | 1.063 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.781 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.500 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| AEEA | SWITCH TYPE | PUSH-PULL |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 30.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| AEFN | NONTURN DEVICE LOCATION | AT 4 OCLOCK AND AT 8 OCLOCK |
| AEFP | NONTURN DEVICE RADIUS | 0.500 INCHES NOMINAL |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, THREE POSITIONS MAINTAINED |
| AFJN | III FRAGILITY FACTOR | MODERATELY RUGGED |
| AGAV | III END ITEM IDENTIFICATION | 5895-01-233-2919 COMMUNICATION SYSTEM CONTROL GROUP |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF AND SWITCH |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| PMLC | III PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| TEST | TEST DATA DOCUMENT | 57045-D6002921 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| AEGH | SWITCH OPERATING POSITION | ANY POSITION OF ROTATION TRAVEL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| PRMT | III PRECIOUS MATERIAL | GOLD |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 290.0 MINIMUM AND 300.0 MAXIMUM |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | III CUBIC MEASURE | 0.195 CUBIC INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 290.0 MINIMUM AND 300.0 MAXIMUM |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 150.0 SINGLE SECTION |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.250 DC |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
